Products center > Pump > High precision
Customer service line
+86-312-3125360
FL02
This pump head is specially used in high precision filling and it adopts the patented technology (utility model 201720657416X), which can realize the arbitrary filling amount and adjust the error between channels to zero. The flow automatic compensation c
Flow range：0-2000mL/min
Max channel：4*F15/25；20*MCX
1. This product is specially designed for filling. It can reduce the error between channels and realize arbitrary adjustment of filling volume, and make flow compensation with automatic adjustment system.
2. High definition LCD (3.5 inch) shows all the parameters at the same time, and an all-new interface that makes setup and operation easier than ever.
3. Using "double CPU" control, drive and control are separated, accurate one-key filling let repeating precision up to ± 0.3%. It can be widely used in the production line for timing and quantitative transmission.
4. Featured dispensing and transmission working mode and including three kinds of dispensing mode-timed dispense, copy dispense, volume dispense. Suck back angle can be set arbitrarily within 720 degree.
5. The flow rate can be calibrated; Start/stop/reverse are available; Full speed can purge the tubing rapidly.
6. These precision drives offer analog remote control options such as capacitance sensor, liquid level sensor, photoelectric sensor and foot switch -ideal for automated process applications.
7. Using the stepper motor to control speed, high precision and is not affected by the change of load, large torque, low power consumption, strong adaptability.
8. Excellent driving circuit performance, good heat dissipation, low noise, stable running, with power off memory function. Conformal coating is used on the circuit board, anti interference characteristics and wide voltage design, suitable for complex environment.
9. This product has handles, easy to carry, and can be installed with a variety of pump heads.
Model: FL02
Rpm: 0.1-400rpm
Flow range: 0.008-2000ml/min
Speed resolution: 0.1rpm（≤100rpm）； 1rpm（≥100rpm）
Fine adjustment of filling volume: With the F series pump head of our company, it can realize the arbitrary adjustment of the filling amount, reduce the error between channels, flow compensation etc.
Filling volume resolution: 0.001-0.01mL(different tubing, different adjustment resolution)
Filling quantity repeat error: ±0.3%
Filling volume keeps error: 1% in 68 hours under continuous operation conditions of 100 rpm (filling special tube, the speed is inversely proportional to time)
Allocation time: 0.1-999.9S
Distribution volume: 3μL-9999L
Number of allocations: 1-9999 times（0 times for an infinite loop）
Interval time: 0.1-999.9s
Display: LCD screen (3.5 inch)
Operation: Membrane keypad + Digital control knob
External control speed regulation: 0-5V (standard)、0-10V (optional)、4-20mA (standard), 0-10K (standard)
External control type: Start /stop, Direction change【TTL 5V (standard), TTL 12V (optional), TTL 24V (optional)
Port output: DC12V Power Output; DC5V TTL Output (optional)
Communication Interface: RS232, RS485 (Start/stop, Direction change, speed control)
using electric: AC220V±10%, 50Hz/60Hz(standard); AC110V±10%, 50Hz/60Hz; AC380V±10%, 50Hz/60Hz(optional)
Power: ≤45W
working environment: Temperature, 0℃ to 40℃; Relative humidity < 80%
Protection level: IP31
Weight: 6.1kg
Pump head | Tubing（内径*壁厚mm） | Flow range (mL/min) | |
FL02 | F15 | 13# 14# 19# 16# 25# 17# 18# | 0.008-32 0.028-114 0.053-214 0.088-354 0.188-754 0.31-1240 0.4-1600 |
F25 | 15# 24# 35# 36# | 0.175-700 0.27-1080 0.385-1540 0.5-2000 | |
MC8X | 0.19*0.9 0.25*0.9 0.5*0.8 1*1 2*1 2.4*0.85 2.79*0.85 | (≤100rpm) 0.0002-0.2 (≤100rpm) 0.00035-0.35 (≤100rpm) 0.0013-1.3 (≤100rpm)0.0053-5.3 (≤100rpm)0.015-15 (≤100rpm)0.0185-18.5 (≤100rpm)0.025-25 | |
MC4X | 0.19*0.9 0.25*0.9 0.5*0.8 1*1 2*1 2.4*0.85 2.79*0.85 | (≤100rpm)0.00024-0.24 (≤100rpm)0.00042-0.42 (≤100rpm)0.00166-1.66 (≤100rpm)0.00556-5.56 (≤100rpm)0.0206-20.6 (≤100rpm)0.024-24 (≤100rpm)0.0324-32.4 | |
BZ15-16 | 16# | 0.082-328 |
